Platform

The workspace for a lightning risk assessment

Sphera runs IEC 62305-2:2024, AS 1768:2021 and NFPA 780-2026, each by its own standard's method, with branded audit-ready reports and a place for your whole team to work, all in the browser.

A laptop showing an electrical design model of a building, on a desk beside drawings and a lamp, with a city at night behind
What you get

Everything an assessment needs

Real engines for IEC 62305-2:2024, AS 1768:2021 and NFPA 780-2026, branded audit-ready reports and a workspace for your whole team, all in the browser from the first assessment.

Sphera, for each standard

For IEC 62305-2:2024, Lumex™ computes collection areas, dangerous-event rates, damage probabilities and loss factors straight from the standard's coefficients. It rolls the nine risk components into the risk R, and four partial frequencies of damage into the frequency of damage F. Each gets a verdict against its tolerable threshold.

  • The risk R from nine risk components, and the frequency of damage F from four partial frequencies
  • Full coefficient trace behind every result
  • What-if scenarios for LPS class and SPD coordination
  • AS 1768:2021 and NFPA 780-2026 run on Sphera too, each by its own method

See each standard's method, step by step

Reports your client can check

Every assessment produces a PDF with a cover, a summary, the method, the results for each zone and an engineer sign-off. Every approved report carries a verification code and a QR code, so your client can confirm it at lumex.zone/verify. Each periodic inspection gets its own report too.

  • A verification code and QR code on every approved report
  • Six report templates, chosen for the workspace or for one report
  • Your sign-off block, and your logo and firm name, with full white label on Enterprise
  • The working behind each risk, in full

Team workspaces

A project holds many sites, each independently assessed with its own zones and report, and the project keeps a history of its changes. Roles match how firms divide the work, and the project rollup rebuilds automatically as the team makes changes.

  • Project, site and zone structure
  • Admin, Engineer, Reviewer, Surveyor and Viewer roles
  • A history of changes for each project
Also included

Built for how the assessment actually gets done

On site

  • Capture on a phone

    Record a site on a phone or tablet in the browser, with your location and photos.

  • A live estimate while you capture

    The estimate updates as you enter the site and names the inputs it still waits for.

  • Suggested answers from the standard

    Where the standard prints a typical value, Lumex™ suggests it, labelled with its source. The report lists every answer left at a suggested value.

At the desk

  • Protection options side by side

    Compare named protection proposals, each with its live result, and see the least protection that brings every risk within its limit.

  • Compliance-ready exports

    Audit-ready PDF reports carrying a full coefficient trace, ready to file with the building owner. Inspection reports and each protection system's evidence pack download as PDFs too.

  • Notifications and phone push

    Each person hears about reviews, approvals, inspections due and open repairs, in the bell and on their phone.

After handover

  • Inspections and repairs

    Plan each periodic inspection, record readings and photos at every test point, log defects and follow each repair through its retest.

  • Every site in one view

    See each protection system with its assessment, inspections and open repairs. A lightning strike is recorded as the inspection that follows it.

  • Reassessment reminders

    Every assessment carries a review date. The engineer gets an email two months before it and again when it arrives, so no site slips past its review.

Across the firm

  • Role-based access control

    Each role (Admin, Engineer, Reviewer, Surveyor or Viewer) scopes what a person can do on every project, report and billing action.

  • Audit trail

    An append-only log of every edit, approval and impersonation session, recording who did what and when, so any figure can be traced.

  • Workspace isolation

    Each firm's data is isolated to its own account and encrypted, and handled under the law that applies to you, such as the GDPR or India's DPDP Act.

Lumi, your assistant

AI that assists the engineer

Lumi works around the engine today, with the signing engineer always in control.

Sample conversation: one assessment, Tower A, from first question to sign-off
  1. AI around a proprietary engine

    Assistive AI that surrounds Sphera to speed the routine work, while the engine itself does every calculation in the report.

    Lumi is reading Sphera's calculation for Tower A, zone Z1
  2. Risk explained

    Ask Lumi how any figure was worked out, or what drives a risk, and it answers from the assessment's own calculation trace.

    Why is risk R above the limit?

    Two of the nine components drive it: physical damage from a strike on the tower, and injury from a strike on a connected line.

    RB 1.62 × 10⁻⁵Sphera RU 0.71 × 10⁻⁵Sphera
  3. What-if questions

    Ask what happens if the building were taller or wider, and Lumi reruns the saved assessment without changing it.

    What if the tower were 30 m, not 42 m?

    Recalculating with your changes

    Sphera reran it at 30 m. Risk R falls but stays above its limit. Your saved assessment still reads 42 m.

    R 2.06 × 10⁻⁵Sphera, what-if run
  4. Protection recommendations

    Lumi finds the smallest set of protection measures that brings each risk within its limit, by the standard's own method, and the signing engineer makes the call.

    What is the least protection that passes?

    Finding protection measures

    An LPS of class III with coordinated surge protection is the smallest set that brings every risk within its limit. You choose what goes in the report.

    R with these measuresWithin RT, Sphera
  5. Draft review

    Before you compute, the Review step lists every input that is missing or out of range, under the step it belongs to. The figures still come from the standard's method.

    Review before you compute

    Two inputs need you before the figures are worked out.

    • Missing: the length of the power line
    • Out of range: the soil resistivity
  6. A summary for your client

    Lumi drafts a summary from the computed figures. Every figure is checked against the engine, and you accept, edit or leave it out before approval.

    Draft the summary for your client.

    Summary for your clientDraft

    Tower A needs protection. With an LPS of class III and coordinated surge protection, every risk falls within its tolerable limit.

    • Every figure checked against Sphera
    AcceptEditLeave out
  7. Answers about your workspace

    Ask which sites carry the highest risk, what is waiting for review or how many reports you issued, and Lumi answers from your workspace.

    What is waiting for review?

    Reading your assessments

    5 assessments wait for review. The oldest is Pune Metro, Tower C, sent on 09-Oct-2026.

  8. Support in the chat

    Lumi raises a support ticket for you and reads the reply. You confirm every action first.

    The logo on my report cover looks blurred.

    I prepared a support ticket for you. Send it?

    Send ticketEdit first
  9. The engineer stays in control

    Every risk value is computed straight from the method of the standard you chose, and the signing engineer reviews it before the report is issued.

    The signing engineer approved the reportSigning engineer, 13-Oct-2026, 4:12 pm IST
    Reviewed

Every risk figure in the conversation came from Sphera. Every decision came from the engineer. Eight abilities are live today.

Lumi on this site answers questions about Lumex™.

Coming soon

What we are building next

These are on the way, and each one arrives in your workspace as it ships.

Live today

Already in your workspace.

  • Capture on a phoneIn the browser, with your location and photos.
  • Protection options side by sideEach with its live result.
  • Inspections and repairsReadings and photos at every test point.
Coming soon

The Surveyor app

Record site data, photos and inspections on your phone, even without a signal, and hand them to the engineer.

Coming to the App Store and Google Play. Phone capture already works in the browser today.

Coming soon

Protection design you can see

See the designed lightning protection system beside the risk result, on screen and in the report.

Coming soon

Commissioning and handover

Close an installation with a commissioning visit checked against the design, and hand the owner one pack.


The report your stamp can stand behind.
FAQs

Got questions? We've got answers

Find quick answers to the most asked questions about the engine, the standard and your data.

How is a workspace organised?

A workspace holds your clients and their projects. A project groups the buildings on one job, and each building is its own assessment, with its own standard, inputs, result, report and review date. Under IEC 62305-2:2024 a building is split into zones, and every zone is assessed in the same run. Your whole team works in the one workspace, each person with a role.

Which roles can I give my team?

Five. An Admin runs the workspace, including the team and billing. An Engineer creates and edits assessments, submits them for review, generates reports and sends them to clients once approved, and opens the full calculation trace. A Reviewer decides on the assessments sent for review and can generate reports. A Surveyor records site data on location in the Lumex™ Surveyor app. It is not a land surveying role. A Viewer can open clients, projects, assessments and reports but cannot change them.

How do review and approval work?

An Engineer submits a finished assessment for review. A Reviewer or an Admin then approves it, sends it back for changes or rejects it, with a note. If decision emails are switched on in Settings, the project's engineer also gets an email. A Reviewer sees the projects assigned to them and cannot approve their own work. An Admin can, unless you turn on independent review, which makes every approval need a second person. The PDF's sign off page names who prepared the report and who approved it, with the date.

What is in the full report and the short report?

The full report is the filing document: the verdict and a summary, the inputs, the working behind each risk, the protection recommended and what it leaves, and a legal page with signature and stamp lines for the engineer. Its sections follow the standard you chose. The short report keeps the verdict, the summary and your site photographs and leaves out most of the working, for a client update or a quick review.

What can Lumi do in the workspace?

Lumi, the Lumex™ assistant, answers from your own workspace. It lists and counts your projects, clients and assessments, ranks your sites by risk, summarises a saved result, and explains how any figure was worked out, with the clause behind it. It can rerun an assessment with different building dimensions as a what-if, recommend the smallest set of protection, and raise a support ticket for you once you confirm. Sphera still computes every figure.

Can I check my inputs before I trust a result?

Yes. Each standard checks your answers as you enter them and refuses a value its method does not allow, so a saved assessment is always one the engine can compute. Where the standard prints a typical value, Lumex™ suggests it, labelled with its source, and the report lists every answer left at a suggested value. A live estimate updates as you capture and names the inputs it still waits for.

Can I keep a history of changes?

Yes. Each project keeps a revision list with a revision number, a date and a note on what changed, so you can show which version a client was issued. Each assessment keeps every review cycle, from submission to decision, and sensitive actions in the workspace go to an append-only audit log of who did what and when. The revision list stays in Lumex™ and is not printed on the PDF.

Get started today

The whole assessment in one place, not split across Excel and Word